|
Virsensors is Dalmatic range of photocells for primarly
the industrial door industry.The sensors come in a standard
version RA/TA, a self-contain RS/TS and a safety edge
self-contain RSS/TSS.
Small dimentions, extensive reach
The combination of extremely small
sensors dimensions of Ø10 L30mm and a reach of up to 25 m (TA/RA)
& 12 m (TS/RS), facillitates that the sensors can be built into
any machine even in locations with very poor accessibility.
Insensitive to dirt and dust
A dirty/dusty environment is not
normally associated with the use of photo cells. Only Ø5 mm of
the sensor's Ø10 mm surface forms the light sensitive part. This
lins free design creates a light sensitivity, whitch results in
surface build dirt/dust being easily penetrated.
Setting and vibrations
In connection with installation and operation on machinery with
servere vibration and over long distances the usage of optical
sensors is often connected with major setting
and operation difficulties. The sensor series TA10 / RA10 (to be
used with controller CA-S or CA-D) and TS10 / RS10 (self-contain
design) is fully sealed in order to ensure tightness (IP67) and
prevent operations errors due to vibrations.
The optical design ensures controlled opening angles and thus a
simplification of sensor setting even over long distances.
Please visit our
Virsensors website for further information
www.virsensors.com
ß
more
info... |
